Presealed Systems
	Parts/Cost	Minutes
Cost of Sleeve	$	N/A
Does Sleeve have a Cap?
Step 1: Get Material to Cover Hole	N/A	N/A
Step 2: Cut/Attach/Remove Hole Cover	N/A	N/A
Is the Sleeve Height the same as the Concrete Height?
Step 3: Get Extension Adapter	N/A	N/A
Step 4: Remove Cap	N/A	N/A
Step 5: Cut Device	N/A	N/A
Step 6: Attach Extension	N/A	N/A
Step 7: Re-Attach Cap	N/A	N/A
Is Water Tight an Issue?
Step 8: Get Water Module	N/A	N/A
Step 9: Attach Water Module	N/A	N/A
Is the Deck Corrugated?
Step 10: Get Deck Adapter Part(s)	N/A	N/A
Step 11: Attach Deck Adapter Part(s)	N/A	N/A
Step 12: Cut Opening in Floor	N/A
Install Sleeve on Deck
Step 13: Attach Device to Deck	N/A
Pour Concrete
Step 14: Remove Cap	N/A
Step 15: Clean Pipe	N/A
Step 16: Install Pipe	N/A
Step 17: Get Riser Clamp	N/A	N/A
Step 18: Install Riser Clamp	N/A	N/A
Step 19: Get Mineral Wool	N/A	N/A
Step 20: Install Mineral Wool	N/A	N/A
Step 21: Get Fire Caulk	N/A	N/A
Step 22: Install Fire Caulk	N/A	N/A

Total Minutes:	12.5
Total Labor Cost:	$12.50
Total Parts Cost:	$17.03
Total Installed Cost:	$29.53